A boiler not working during winter can be frustrating. You need not worry because you can go through a checklist before calling a Herriman HVAC contractor. This article will shed more light on how to do a checklist before calling a boiler repair Herriman, UT contractor.
Inspect for Noisy Pipes
If you’ve got a squealing or other strange noise coming from your pipes, then it might just be because there’s dirt stuck in the joints somewhere. Check all of them for any obstructions, rust, physical damage, etc., and if possible, remove anything that looks like it shouldn’t be there.
Another reason can be air buildup in the system. If you hear air escaping from somewhere in your pipes, you need to elevate your pipes using a stand to get rid of the air.
Inspect the Radiators
If your boiler isn’t heating correctly, you may need to check out the condition of your radiators. If one of the radiators is warm, then it means that the heating system is working; however, there is a problem somewhere if all radiators are cold.
The first thing to do is check that you have turned up the heat in your boiler. Typically, most boilers need to be set at least on 3 out of 7 maximum. If this doesn’t work and you don’t know what to do next, you may need to call a HVAC contractor in Herriman, Utah.
Flush your Boiler
If your boiler isn’t producing the expected amount of heat in your house, then the chances are that it needs to be flushed. Flush by shutting the power off to your boiler and automatic feed, then attach a garden hose to your boiler drain valve, directing it toward a floor drain or sewer.
While you can flush a boiler yourself, a HVAC professional should handle this process. They have the skill and knowledge to service a boiler correctly. It is essential to flush your boiler if you want it to last for as long as possible. For a boiler to reach its highest efficiency level, all sediment needs to be removed from the system.
Check the Power
Check the power on your boiler first. If it is on but still not working, there could be a problem with your thermostat. Reset your thermostat’s setting to see if it will start working again. If you are using oil or gas as fuel for your heating unit, make sure that there are enough reserves in the tank.
Inspect the Water Level
If the water level is lower than usual, it could be that the boiler is not working as efficiently as possible because the burner needs to be primed. Find the problem by checking for water in the boiler. If there are any leaks, the pipe should be replaced so contact a Herriman HVAC contractor.
When it comes to maintaining boilers, many things need attention regularly to preserve their longevity and efficiency. If you’re unsure where to start with this list of helpful hints, then reach out to At Your Service Pros and let their licensed technicians advise you. Having regular boiler maintenance done will help your boiler run smoothly for years to come.